This Winchester Model 1866 carbine was manufactured in 1868. The carbine has the Second Model features which include receiver with flare at the junction with the forearm and graceful curve in the hammer area, single upper tang screw, concealed serial number on the lower left side of the tang and Henry and King's patent barrel legend. The carbine has a distinctive brass receiver and crescent buttplate with blue barrel, 13-shot magazine and barrel bands. The hammer, trigger and lever are casehardened. The oil finished stock and forearm are straight grain American walnut. The front sight blade is an integral part of the upper barrel band. The barrel has a dovetail mounted two leaf fixed rear sight with "1, 3," and 5" elevation marks. The magazine has the early threaded cap. A staple mounted saddle ring is located on the left side of the receiver. The hammer has coarse knurling on the spur. The crescent buttplate has a sharply pointed heel and hinged butt trapdoor. The top of the barrel is roll stamped with the early pattern, two-line marking "HENRY'S PATENT-OCT. 16. 1860/ KING'S PATENT-MARCH 29. 1866." located between the lower barrel band and the rear sight. The serial number is stamped on the left side of the lower tang, in the upper stock inlet and on the inside of the buttplate. All of the visible serial numbers match. Provenance: The Joe Marlin Hilliard Collection