This is a scarce example of a Winchester Model 1873 Lever Action Short Rifle that was manufactured in 1911. This rifle is accompanied by a Cody Firearms Museum letter that describes it as: "Rifle, 44 caliber, 20 inch, octagon barrel" and "Set trigger". The letter states that it was shipped from Winchester to Durango, Mexico, on July 10, 1911. The rifle has the Third Model receiver with integral dust cover rail and dust cover with serrated edges. The top of the receiver is rounded at the junction with the barrel. The octagon barrel has a standard sporting style front sight with nickel-silver blade and a sporting style buckhorn rear sight with screw adjustable center piece. The receiver tang is factory drilled and tapped and the rifle has a special order single set trigger. The crescent buttplate has a sliding brass trapdoor. The barrel, magazine, forearm cap, dust cover, receiver loading gate and trigger are blued. The hammer, lever and crescent buttplate are color casehardened. The stock and forearm are straight grain American walnut with a varnish finish. The left barrel flat is roll-stamped with the two-line legend: "WINCHESTER'S REPEATING ARMS, NEW HAVEN, CONN. U.S.A./KING'S IMPROVEMENT PATENTED MARCH 29.1866. OCTOBER 16. 1860"ahead of the rear sight. The caliber: "44 W.C.F." is roll stamped on the left barrel flat between the rear sight and the receiver. Oval Winchester "W/P" proof marks are stamped on the top of the barrel and receiver. "44 CAL" is stamped in script across the brass cartridge elevator. The upper receiver tang is roll-stamped: "MODEL 1873/-WINCHESTER-/TRADE MARK' in three lines. The serial number, "646331B" is stamped in script on the lower tang behind the lever latch. Model 1873 rifles with special short barrels of 22-inches or less are rare.